More Coins, Less Junk: Smart Coin Shooting with Zeke (aka Glenn)

Coin shooting is all about efficiency — finding the good stuff without wasting your whole hunt digging junk. In this episode, I walk through how to zero in on valuable coin targets using smart discrimination, tone reading, and real-time decision-making in trashy ground.

Working an old schoolyard, I break down how I read target IDs, interpret jumpy signals, and work around trees and tight spots where coins love to hide. If you’re tired of digging broken cans and random trash, this style of detecting can change everything.

The Challenge of Trashy Ground

Busy yards and schoolyards are full of distractions:

• Broken cans and can slaw
• Foil and surface junk
• Signals that jump all over the place
• False tones near fences and roots

You can burn an entire hunt chasing trash — unless you learn how to filter the noise.

Target IDs, Tones & Smart Discrimination

In this hunt, I focus on the signals that matter. That means paying attention to:

• Target ID ranges that consistently point to coins
• Clean, repeatable tones vs. scratchy or broken ones
• 50s and 70s signals that could be coins — or trash — and how to tell the difference
• Signal behavior when you rotate around the target

Not every “good” number is a coin, but patterns matter. Over time, you learn which signals deserve a dig.

Coil Choice & Pinpointing Accuracy

Your coil and pinpointing technique can make or break a coin-shooting session:

• Smaller coils help separate good targets from nearby junk
• Accurate pinpointing means smaller plugs and faster recoveries
• Tight, controlled swings help isolate the best tones

The more precise you are, the more coins you’ll pull without wasting time.

Working Trees, Edges & Hidden Spots

Coins love to hide in places most people overlook:

• Around tree bases
• Near fences and posts
• Along walkways and cut-through paths
• Shallow surface breaks where people sit or drop things

In this episode, I show how to work these areas slowly and intentionally — listening for the subtle, repeatable tones that stand out from the background noise.

Avoiding Common Mistakes

A few traps that cost detectorists time and finds:

• Chasing every jumpy, unstable signal
• Ignoring mid-tones that could be coins
• Running settings too hot for trashy ground
• Rushing your swings instead of letting the coil work

Smart coin shooting is about discipline — choosing the right targets, not all of them.

More Coins, Less Frustration

Time is limited. The more intentional you are with your targets, the more coins you’ll pull in a short hunt. This approach is perfect for busy parks, schoolyards, and yards full of junk.

Smart detecting means more coins — and fewer wasted digs.

Recommended Metal Detecting Gear

Pro‑Pointer

View on Amazon

Metal Detector

View on Amazon

SP24 Coil

View on Amazon

Knee Pads

View on Amazon

Tool Belt

View on Amazon

Zeke’s Metal Detecting Gear

These are the detectors, coils, pinpointers, and tools I actually use in the field.
If you want to gear up — or just support the channel — this curated shop is a great place to start.

Visit the Metal Detecting Gear Shop

Disclaimer: As an Amazon Associate, I earn from qualifying purchases.
These recommendations are based on gear I personally use or genuinely trust.
Your support helps keep Zeke (aka Glenn) out in the field and sharing more stories — thank you.

High Tone in All-Metal Mode Stayed Strong in Tone Mode – It Was a Quarter! Bounty Hunter Dig

High Tone Stayed Strong – It Was a Quarter!
Bounty Hunter Dig

Hey friends, Zeke (aka Glenn) here.

Back out again with the Bounty Hunter and the ground gave me one of those classic signals we all love.

I got a clear high tone in all-metal mode. Switched over to tone mode to double-check… and the high tone stayed right there, solid and confident. No fading, no bouncing around.

What coin was it? A nice clean quarter.

These are the digs that feel good every single time. Nothing rare, nothing ancient — just a modern coin that rang true in both modes and ended up in the pouch. It’s a reminder that sometimes the machine tells you exactly what you need to know if you take a second to verify.

I always like running a quick mode switch on strong signals. All-metal gives you the raw response, tone mode helps confirm the conductivity range, and when both agree on a high tone, the odds of a good coin go way up.

Have you had a high tone lately that turned into a quarter (or something even better)? I’d love to hear about it.

Keep swinging, stay curious, and I’ll catch you on the next hunt.
– Zeke (aka Glenn)

Bounty Hunter Showcase

The Bounty Hunter continues to deliver reliable high-tone coin signals and solid everyday performance. A great machine for consistent hunting.

Check Out the Bounty Hunter Tracker

Pinpointer Showcase

A reliable pinpointer makes recovering those clean high-tone coins faster and easier — especially when the signal is strong and clear.

Get a Quality Pinpointer

Shop My Recommended Gear

Support the channel and grab the same gear I use and trust out in the field.

Visit My Amazon Store

As an Amazon Associate I earn from qualifying purchases. This helps support the channel at no extra cost to you. Thank you for the support!

Stop Digging Trash: Smarter Metal Detecting in Parks and Playgrounds

Most metal detecting advice still tells you to “dig everything.” That’s fine in a quiet field—but in busy parks, playgrounds, and city strips, that approach will wear you out fast. This episode is all about detecting smarter: learning how to read your machine so you can skip the junk and chase the signals that actually matter.

In this live-style breakdown, Zeke (aka Glenn) shares the modern targeting techniques he uses to pull real treasure out of noisy ground—Tiffany rings, tiny buttons, silver earrings, and more—while leaving most of the trash behind. If you’re tired of digging endless junk, this is the mindset shift that changes everything.

Why “Dig Everything” Doesn’t Work Everywhere

Parks and playgrounds are some of the noisiest places you can hunt. Between can slaw, foil, caps, and random metal, your detector is constantly talking. If you treat every signal the same, you’ll spend your whole hunt chasing trash.

The goal isn’t to get lazy—it’s to get intentional. When you understand how your machine behaves, you can make smarter decisions and save your energy for the targets that matter.

The Three Clues That Reveal Treasure Targets

When deciding whether to dig, Zeke focuses on three key behaviors:

• Target Response Speed — Clean, fast hits often point to smaller, more defined targets.
• Signal Clarity — A tone that holds together from multiple angles is worth investigating.
• Target ID Stability — A little movement is normal, but wild swings usually mean junk.

None of these clues are perfect alone—but together, they tell a story. And that story helps you decide whether a signal is worth your time.

Spotting Bogus “Big Target” Signals

One of the fastest ways to cut down on trash is learning what big junk sounds like. These signals often:

• Sound huge from far away
• Stay loud even when you raise the coil
• Feel like a “blob” instead of a defined hit

Could it be something cool? Sure. But in most parks, it’s usually cans, big iron, or buried junk that isn’t worth tearing up the ground for.

When to Dig Everything—and When to Get Picky

There are times to dig almost everything:

• New permissions with old history
• Quiet fields with low trash
• Deep, iffy targets in older soil

But in modern parks and playgrounds, being selective pays off. Zeke listens for:

• Repeatable tones from multiple angles
• IDs that behave consistently
• Fast recovery between nearby targets

These habits are how he’s pulled Tiffany rings, tiny buttons, and silver earrings out of noisy sites that most people walk past.

Adjusting for Depth and Environment

Depth and location matter. In playground mulch:

• Shallow, sharp signals often mean modern drops
• Deeper, softer tones might hide older or heavier items

In parks and cityscapes, Zeke often:

• Works lanes between structures
• Slows down to let the machine separate targets
• Uses coil control to isolate one signal at a time

The goal is to give your detector a fair chance to tell you what’s really there.

Knowledge Is the Real Treasure

This episode isn’t about never digging trash—you’ll always dig some. It’s about reducing the guesswork and learning to trust what your machine is telling you.

The more you understand target behavior, the more your pouch fills with keepers instead of junk. Don’t just dig—detect smarter, dig deeper, and find more.

Recommended Metal Detecting Gear

Pro‑Pointer

View on Amazon

Metal Detector

View on Amazon

SP24 Coil

View on Amazon

Knee Pads

View on Amazon

Tool Belt

View on Amazon

Zeke’s Metal Detecting Gear

These are the detectors, coils, pinpointers, and tools I actually use in the field.
If you want to gear up — or just support the channel — this curated shop is a great place to start.

Visit the Metal Detecting Gear Shop

Disclaimer: As an Amazon Associate, I earn from qualifying purchases.
These recommendations are based on gear I personally use or genuinely trust.
Your support helps keep Zeke (aka Glenn) out in the field and sharing more stories — thank you.

Coin Slam! Penny, Nickel, Dime & Quarter with the Bounty Hunter – One Hunt, All Four Coins

Coin Slam! Penny, Nickel, Dime & Quarter
with the Bounty Hunter

Hey friends, Zeke (aka Glenn) here.

There’s finding a few coins on a hunt… and then there’s logging a full Coin Slam.

This session with the Bounty Hunter delivered exactly that — a penny, a nickel, a dime, and a quarter, all in the same outing. Nothing rare, nothing ancient, just a clean sweep of the four most common coins and that quiet satisfaction that comes with completing the set.

I was swinging along, pulling signals one after another, and before long the pouch had one of each. It’s one of those little milestones a lot of us quietly celebrate. You don’t always get silver or jewelry, but when the penny, nickel, dime, and quarter all show up in the same hunt, it still feels like a win.

These modern coin days are great practice. They keep the coil swinging, the ears tuned, and the recovery skills sharp. And every once in a while the ground decides to hand you the full set just to keep things fun.

If you’ve been out lately, have you hit a Coin Slam yet? Or maybe you’ve had a day where the coins just kept coming? I’d love to hear about it.

Keep swinging, stay curious, and I’ll catch you on the next hunt.
– Zeke (aka Glenn)

Bounty Hunter Showcase

The Bounty Hunter continues to be a reliable partner for coin shooting and everyday detecting. Solid performance without the big price tag.

Check Out the Bounty Hunter Tracker

Pinpointer Showcase

A good pinpointer makes recovering those coins faster and cleaner — especially when you’re chasing a full Coin Slam.

Get a Quality Pinpointer

Shop My Recommended Gear

Support the channel and grab the same gear I use and trust out in the field.

Visit My Amazon Store

As an Amazon Associate I earn from qualifying purchases. This helps support the channel at no extra cost to you. Thank you for the support!

Tiffany Ring in 30 Minutes: Plano Playground Metal Detecting with Zeke (aka Glenn)

Most metal detecting hunts are mostly trash — but every once in a while, the ground gives you something special. This quick 30‑minute session in Plano, Texas turned into one of those hunts. With rain clouds building and time running short, I hit a local playground and walked away with three wildly different finds: a Tiffany & Co. silver ring, a 2020 penny, and a Dominican 25 peso coin.

It’s the perfect reminder that every signal is a story — and sometimes the ones that sound “meh” end up being the best surprises of the day.

A Quick Hunt Before the Rain

This wasn’t a long, planned hunt. It was a “let’s see what I can pull before the sky opens up” kind of session. Playgrounds like this are unpredictable: tons of trash, tons of traffic, and tons of potential. With just a detector, a pinpointer, and a simple tool belt, I started working the mulch and high‑traffic lanes between structures.

The first few signals? Classic playground junk — can slaw, jumpy tones, and shallow trash. But that’s part of the process. Every piece of trash teaches you something about how your machine reacts in messy ground.

The Finds Start Rolling In

The first keeper was a 2020 penny. Nothing rare, but a good sign — modern coins mean people are still dropping things here.

Then came the surprise: a Dominican Republic 25 peso coin. Not silver, not old, but definitely unexpected. Finds like this remind you that every park has its own little history, shaped by whoever passed through before you.

The Tiffany & Co. Silver Ring

The star of the hunt started like so many other playground signals: not perfect, not terrible, but interesting enough to dig. The ID wasn’t locked, but it wasn’t chaotic either. The tone had just enough weight to make me curious.

A few scoops later, out of the mulch came a ring — and the moment I saw the Tiffany & Co. mark, the whole hunt changed. That’s the thrill detectorists chase: the moment when a “maybe” signal becomes something worth celebrating.

Why Playgrounds Still Produce

Parks and playgrounds get overlooked because they’re trashy, noisy, and unpredictable. But that’s exactly why they’re still full of treasure. High traffic means constant drops. Mulch hides things well. And most detectorists skip the messy signals that hide the good stuff.

This hunt was a perfect example of why you should:

• Dig the “pseudo‑trash” signals
• Work the lanes between structures
• Pay attention to subtle tone changes
• Stay patient when the trash piles up

Because sometimes, the next beep is a Tiffany ring waiting to be found.

Every Signal Is a Story

In just 30 minutes, this playground gave up:

• A 2020 penny
• A Dominican 25 peso coin
• A Tiffany & Co. silver ring

Three different stories, one small patch of ground, and a reminder that the best finds often come from the signals most people walk past. If you’re willing to dig, listen, and stay curious, the ground will eventually reward you.

Recommended Metal Detecting Gear

Pro‑Pointer

View on Amazon

Metal Detector

View on Amazon

SP24 Coil

View on Amazon

Knee Pads

View on Amazon

Tool Belt

View on Amazon

Zeke’s Metal Detecting Gear

These are the detectors, coils, pinpointers, and tools I actually use in the field.
If you want to gear up — or just support the channel — this curated shop is a great place to start.

Visit the Metal Detecting Gear Shop

Disclaimer: As an Amazon Associate, I earn from qualifying purchases.
These recommendations are based on gear I personally use or genuinely trust.
Your support helps keep Zeke (aka Glenn) out in the field and sharing more stories — thank you.

Pull Tab, Ring, or Nickel? Bounty Hunter Tracker Tone Mode Mystery Solved – It Was a Nickel!

Pull Tab, Ring, or Nickel?
Bounty Hunter Tracker Tone Mode Delivers a Nickel

Hey friends, Zeke (aka Glenn) here.

If you’ve spent any time with a Bounty Hunter Tracker in tone mode, you know that familiar mid-tone. It could be a pull tab. It could be a ring. Or it could be a nickel. The machine doesn’t always make it easy to tell the difference, and that’s part of what keeps the hobby interesting.

This round, the ground decided to be kind. That uncertain signal turned into a nice little nickel.

I was swinging along, got the tone, checked the target ID, and still wasn’t 100% sure. But the golden rule still applies: dig it if you’re curious. A few scoops later and there it was – a classic nickel sitting in the dirt. No jewelry this time, no trash either. Just a solid coin and another reminder that tone mode keeps us honest.

These ambiguous signals are common with the Tracker, especially in parks or places with a mix of old coins and modern trash. Pull tabs, aluminum, and nickels can all land in a similar range. Experience helps, but the only way to really know is to dig. And honestly, that’s half the fun.

If you’re new to the Bounty Hunter Tracker or still learning the tones, don’t get discouraged by the “maybe” signals. Every dig teaches you something. Some days it’s a pull tab. Some days it’s a ring that makes your heart jump. And some days, like this one, it’s a nickel that quietly adds to the collection.

What about you? Have you had a mid-tone lately that surprised you? Was it trash, treasure, or something in between? I’d love to hear about it.

Keep swinging, stay curious, and I’ll catch you on the next hunt.
– Zeke (aka Glenn)

Bounty Hunter Tracker Showcase

Looking for a reliable, easy-to-use detector that still delivers those classic finds? The Bounty Hunter Tracker is a solid choice for beginners and experienced detectorists alike.

Check Out the Bounty Hunter Tracker

Pinpointer Showcase

Once you’ve got the signal, a good pinpointer makes recovering the target faster and easier. A must-have tool for every dig.

Get a Quality Pinpointer

Shop My Recommended Gear

Support the channel and grab the same gear I use and trust out in the field.

Visit My Amazon Store

As an Amazon Associate I earn from qualifying purchases. This helps support the channel at no extra cost to you. Thank you for the support!

Trash, Treasure, and Texas Playgrounds: A Real‑World Metal Detecting Session with Zeke (aka Glenn)

Most people see a playground as a place for kids to burn energy. I see it as a question: what’s hiding under all that mulch, traffic, and trash? On this Texas evening, with a possible rainstorm rolling in, I grabbed a simple tool belt, headed to a local playground, and decided to find out.

This wasn’t a planned hunt. No fancy setup. No perfect conditions. Just a real, raw, IRL session where trash, deep digs, and surprise targets all mix together. If you’ve ever wondered what metal detecting actually looks like in a busy Texas playground, this is it.

A Texas Playground Before the Rain

There’s something about hunting right before weather moves in. The air feels different, the clock feels shorter, and every signal feels a little more urgent. The ground was trashy, the traffic was high, and the potential was better than it looked.

With just a detector, a pinpointer, and a basic tool belt, I set out to see what the playground wanted to give up today.

Working the Perimeters and Lanes

Instead of wandering randomly, I focused on the spots that quietly collect the good stuff:

• Perimeters around the playground
• Lanes between structures where kids cut across
• Edges of mulch beds and high‑traffic transitions

These are the places where coins, jewelry, and random treasures fall out of pockets and never get picked back up.

Trash, Can Slaw, and Deep Pennies

If you’ve ever detected a playground, you know the drill:

• Can slaw that sounds almost good
• Deep pennies pretending to be something better
• Odd bits of metal that don’t quite make sense

This hunt had plenty of that. But instead of getting frustrated, I treated each target like a data point—another chance to learn how the machine behaves in messy ground.

Reading Signals in Noisy Ground

Playgrounds are noisy. Mulch, underlayment, and random metal all compete for attention. That’s where listening closely really matters.

I paid attention to:

• How stable the target ID was
• Whether the tone broke or held steady
• How the signal behaved as I tightened my swings

Sometimes a target that sounds like junk at first starts to clean up as you work around it. Other times, a “good” signal falls apart once you circle it. The only way to learn the difference is to dig a lot of both.

Detecting Without Tearing Things Up

One of the most important parts of playground detecting is leaving the place looking like you were never there. That means:

• Small, clean plugs or careful mulch moves
• Filling everything back in and smoothing the surface
• Avoiding damage to underlayment and equipment

If we want to keep access to these spots, we have to treat them with respect.

Why This Kind of Hunt Matters

This session wasn’t about a single big score. It was about:

• Seeing how much trash it really takes to find something good
• Practicing signal interpretation in a noisy, real‑world environment
• Staying patient when the ratio of junk to treasure isn’t in your favor

Every deep penny, every piece of can slaw, every “almost” target teaches you something about your detector and your instincts. And every now and then, one of those signals turns into the kind of find that makes all the trash worth it.

“You Just Gotta Dig It”

At the end of the day, metal detecting is unpredictable. Some hunts are hot from the first signal. Others make you work for every little win. But the truth is simple: you can’t find what you don’t dig.

Whether you’re just starting out or you’ve been swinging for years, a trashy Texas playground before a storm is a great reminder of what this hobby is really about—curiosity, patience, and the willingness to bend your knees one more time.

Recommended Metal Detecting Gear

Pro‑Pointer

View on Amazon

Metal Detector

View on Amazon

SP24 Coil

View on Amazon

Knee Pads

View on Amazon

Tool Belt

View on Amazon

Zeke’s Metal Detecting Gear

These are the detectors, coils, pinpointers, and tools I actually use in the field.
If you want to gear up — or just support the channel — this curated shop is a great place to start.

Visit the Metal Detecting Gear Shop

Disclaimer: As an Amazon Associate, I earn from qualifying purchases.
These recommendations are based on gear I personally use or genuinely trust.
Your support helps keep Zeke (aka Glenn) out in the field and sharing more stories — thank you.

Learning the Tracker IV – When Pull Tabs and Rings Sound Alike

Learning the Tracker IV

Pull Tabs, Nickels & Rings Can Sound the Same 🪙 | Zeke (aka Glenn)

I’m still getting to know the Bounty Hunter Tracker IV, and one of the first lessons is clear: pull tabs, nickels, and rings can sound remarkably similar.

In this short hunt I dug a pull tab, then right away scanned my own ring so you can hear the tones side-by-side. No editing tricks — just the raw audio from the machine.

Pull tab vs ring on the Tracker IV — listen and train your ear.

That’s the reality of learning a detector, especially a straightforward one like the Tracker IV. The tones don’t always hand you a perfect answer. You have to dig, listen, compare, and slowly train your ear.

It’s part of the process, and honestly one of the more interesting parts. Every dig teaches you a little more about what the machine is trying to tell you.

If you’re also learning a new detector, hang in there. The sounds start to separate with time and practice.

Happy hunting,
— Zeke (aka Glenn) 🪙

Bounty Hunter Tracker IV Showcase

Simple setup • Quick to learn • All Metal / Tone toggle

Check Current Price on Amazon →

Shop My Metal Detecting Gear

Tracker IV + pinpointers for learning the tones

Visit My Metal Detecting List →

Amazon Affiliate Disclaimer: This post contains affiliate links. If you make a purchase through the links in this post, I may earn a small commission at no additional cost to you. Thank you so much for supporting my content!

Thanks for watching and reading!
Zeke (aka Glenn) • Metal Detecting Adventures

The Setting Change That Turned a Junky Park into a Treasure Hunt

Most backyard treasure hunters overlook what’s right beneath their feet—not because the targets aren’t there, but because their settings and mindset are working against them. This hunt is a perfect example of how a small adjustment can completely change the story of a site.

On a cool evening at a familiar park, Zeke (aka Glenn) revisits a playground that once felt “hunted out.” But with a few key changes—switching to F1, tightening discrimination, and focusing on high‑tone signals—the rusty, trash‑heavy ground suddenly wakes up. What follows is a mix of tiny copper bits, stubborn junk, and even a vintage silver ring hiding in the noise.

A Familiar Park With New Potential

The park itself is nothing special: a playground, some benches, and the usual mix of trash and foot traffic. But that’s exactly why it’s the perfect testing ground. When you’ve already hunted a place before, you know what “normal” feels like—and you can tell when something changes.

This time, the change came from the machine.

The Game‑Changing Adjustment

The breakthrough wasn’t a new detector or coil—it was a settings shift:

• Switching to F1 for cleaner audio
• Dialing in discrimination for trash‑heavy zones
• Optimizing recovery speed for better target separation
• Focusing on high‑tone signals around structures and play areas

None of these changes are dramatic on their own. But together, they transformed how the park sounded—and what started coming out of the ground.

From Rusty Playground to Real Targets

Once the machine settled in, the site started revealing itself:

• Tiny copper pieces hiding in the chatter
• Better coin signals that stood out from the junk
• A vintage silver ring that absolutely didn’t feel like a “dead park” target

Mixed in were the usual suspects—canned slaw, pull tabs, and odd relic‑style bits—but instead of feeling like punishment, they became part of the pattern. Each one confirmed that the settings were doing their job.

Why Settings Matter in Trash‑Heavy Zones

In a clean field, you can get away with lazy settings. In a trashy park, your setup is everything.

• Discrimination + ground balance help cut through the worst junk
• Target IDs + recovery speed reveal when a signal is worth chasing
• Elliptical coils shine in tight, noisy areas around structures

The silver ring didn’t show up because of luck—it showed up because the machine was finally tuned to hear it.

The Mindset Shift That Keeps You Going

Settings are only half the story. The other half is how you think about a site.

Instead of writing the park off as “too junky,” Zeke treated it like a puzzle:

• What is this place trying to tell me?
• How can I adjust to hear the good stuff through the trash?
• What patterns are hiding in the noise?

That mindset made it easier to stay optimistic after digging slaw, tabs, and weird little bits. Every piece of junk was still data—and every high tone that broke through felt earned.

Why This Hunt Matters

This wasn’t a “huge treasure” day. It was a “figure the site out” day—and those are the hunts that make you better.

A rusty playground turned into a treasure hunt not because the park changed, but because the approach did. If you’ve got a spot you’ve written off as too noisy or too junky, it might be time to go back with fresh settings and a different mindset.

Your next silver ring might already be waiting.

Recommended Metal Detecting Gear

Pro‑Pointer

View on Amazon

Metal Detector

View on Amazon

SP24 Coil

View on Amazon

Knee Pads

View on Amazon

Tool Belt

View on Amazon

Zeke’s Metal Detecting Gear

These are the detectors, coils, pinpointers, and tools I actually use in the field.
If you want to gear up — or just support the channel — this curated shop is a great place to start.

Visit the Metal Detecting Gear Shop

Disclaimer: As an Amazon Associate, I earn from qualifying purchases.
These recommendations are based on gear I personally use or genuinely trust.
Your support helps keep Zeke (aka Glenn) out in the field and sharing more stories — thank you.

Night Coin Hunting – Quarter on the Tracker IV

Night Coin Hunting

Quarter Found with Bounty Hunter Tracker IV + Pinpointer 🪙 | Zeke (aka Glenn)

I was out coin hunting after dark with the Bounty Hunter Tracker IV and managed to dig a quarter.

The Tracker picked up the signal cleanly, and once I started the plug the pinpointer made the recovery fast and precise. Night detecting has its own rhythm — fewer distractions, quieter surroundings, and a different kind of focus when you’re working under a headlamp or available light.

Tracker IV + pinpointer = clean night recovery.

It’s a good reminder that you don’t need complicated gear to enjoy this hobby. A solid basic detector and a reliable pinpointer will take you a long way, day or night.

Moments like this are why I keep coming back to it. Simple finds, good gear that works, and time spent outdoors.

Awesome hobby.
— Zeke (aka Glenn) 🪙

Bounty Hunter Tracker IV Showcase

Simple setup • Quick to learn • All Metal / Tone toggle

Check Current Price on Amazon →

Pinpointer Showcase

Fast recovery • Precise targeting • Essential for clean digs

Check Current Price on Amazon →

Shop My Metal Detecting Gear

Tracker IV + pinpointers for day or night hunting

Visit My Metal Detecting List →

Amazon Affiliate Disclaimer: This post contains affiliate links. If you make a purchase through the links in this post, I may earn a small commission at no additional cost to you. Thank you so much for supporting my content!

Thanks for watching and reading!
Zeke (aka Glenn) • Metal Detecting Adventures

Why the Tracker IV’s Mode Toggle Is a Real Game Changer

Tracker IV Mode Toggle

All Metal to Tone Mode – A Real Game Changer 🪙 | Zeke (aka Glenn)

Out with the Bounty Hunter Tracker IV and dug up a rusty metal object. I knew pretty quick it wasn’t a coin or anything valuable — just another piece of junk metal.

But the hunt itself reminded me why I like this machine so much. The ability to toggle between All Metal Mode and Tone Mode on the fly is genuinely useful. You can hunt open in All Metal when you want maximum depth and sensitivity, then flip over to Tone Mode to get a better idea of what you’re looking at before you dig deeper.

All Metal ↔ Tone Mode toggle = one of the best everyday features on the Tracker IV.

It’s a small feature that makes a big difference when you’re out in the field dealing with trashy ground or mixed signals.

Not every find has to be a silver dime. Sometimes the real value is learning how your detector talks to you.

Happy hunting,
— Zeke (aka Glenn) 🪙

Bounty Hunter Tracker IV Showcase

Simple setup • Quick to learn • All Metal / Tone toggle

Check Current Price on Amazon →

Shop My Metal Detecting Gear

Tracker IV + pinpointers for everyday hunting

Visit My Metal Detecting List →

Amazon Affiliate Disclaimer: This post contains affiliate links. If you make a purchase through the links in this post, I may earn a small commission at no additional cost to you. Thank you so much for supporting my content!

Thanks for watching and reading!
Zeke (aka Glenn) • Metal Detecting Adventures